TBOOST

Qliphah in Providence's Shadow

Low-end PC guide: FPS boost, lag and stutter fix

Qliphah in Providence's Shadow FPS boost guide

Qliphah in Providence's Shadow config file

Free. The download link appears after a short wait.

Put it in
%LOCALAPPDATA%\Qliphah\Saved\Config\Windows
Engine
Unreal Engine 5
Replace the existing file, then start the game.

Qliphah in Providence’s Shadow runs on Unreal Engine 5, and its minimum graphics card is an Nvidia GeForce GTX 750 Ti or an AMD Radeon R7 360. This guide gives you a free config file that turns down the heavy graphics work, the in-game settings to change first, and fixes for stutter on a weak PC.

Can you run Qliphah on a low end PC?

  • OS: Windows 11
  • CPU: Intel Core i5-2300 or AMD Ryzen 3 1200
  • GPU: Nvidia GeForce GTX 750 Ti or AMD Radeon R7 360
  • RAM: 4 GB
  • Storage: 8 GB
  • DirectX: 12

If your PC is at or above these specs, the config and the settings below should help. If it is below them, expect low frame rates and stutter even with this config. The config reduces graphics work, but it can’t replace missing hardware.

Best Qliphah settings for low end PCs

Start by setting the graphics options to their lowest values, then change these:

  • Upscaler: Pick TSR. It works on any graphics card, so it’s a safe choice on an older GPU. It’s the only upscaler listed for Qliphah.
  • Frame rate cap: Set it to 60. If your PC can’t hold 60 frames per second, set it to 30. A steady 30 is smoother than a 60 that drops in and out. Skip anything above 60, since a weak PC can’t hold it.
  • V-Sync: Turn it off. It can hold your frame rate to your monitor’s refresh rate and add input lag.
  • Window mode: Pick borderless windowed, which the game offers. It’s the simpler choice if you switch between apps often.

Qliphah Engine.ini location and install

  1. Download the zip with the button above. Unzip it and find the Engine.ini file.
  2. Close Qliphah completely, including any launcher that is still running.
  3. Press Windows + R, paste %LOCALAPPDATA%\Qliphah\Saved\Config\Windows and press Enter. If the folder doesn’t exist, start Qliphah once, close it, and try again.
  4. If the folder already has an Engine.ini, rename it to Engine.ini.bak. This is your backup.
  5. Copy the new Engine.ini into the folder.
  6. Start the game.

What the config changes

The file only changes graphics settings. It doesn’t touch network settings, so it won’t fix lag.

Post-processing

  • Motion blur is off.
  • Depth of field is off.
  • Color fringing at the edges of the screen is off.
  • Lens flares are off.
  • Light shafts are off.
  • Film grain is off.
  • Sharpening is set to 0.6.

Lighting and reflections

  • Ambient occlusion, screen space reflections, subsurface scattering, contact shadows and capsule shadows are off.
  • Volumetric fog uses a coarser grid.

Shadows

  • Shadow quality is set to 2.
  • Shadow resolution is capped at 1024.
  • Shadows reach a shorter distance.
  • Small objects cast shadows less often.

Draw distance and foliage

  • View distance is set to 80 percent of the default.
  • Detail mode is set to 1.
  • Anisotropic filtering is set to 4.
  • Grass and foliage density is set to 60 percent.

Lumen, Nanite and virtual shadow maps

  • Lumen reflections are off.
  • Lumen mesh distance field tracing is off.
  • Nanite geometry uses a coarser detail level, with at most 2 pixels per triangle edge.
  • Virtual shadow maps use a lower resolution for directional and local lights.

The streaming settings turn on async loading and turn off two garbage collection options, for smoother loading and fewer hitches when you move between areas.

How to fix Qliphah stuttering and FPS drops

Qliphah is an Unreal Engine 5 game. The first launch compiles shaders, and that work shows up as stutter. Let it finish and expect hitches for the first few minutes.

If you can, install the game on an SSD. It needs 8 GB of storage, and a faster drive loads the level data with fewer pauses.

Then work through the basics on Windows:

  • Close background apps, such as browsers and overlays from launchers.
  • Update your GPU driver from the official site: Nvidia, AMD or Intel.
  • On a laptop, plug in the power cable and set the power mode to best performance.

Undo the changes

Delete Engine.ini from the folder. If you made a backup, rename Engine.ini.bak back to Engine.ini instead. The game rebuilds its defaults.

Qliphah in Providence's Shadow FAQ

Where is the Qliphah Engine.ini file?

Qliphah keeps it in %LOCALAPPDATA%\Qliphah\Saved\Config\Windows. Press Windows + R, paste that path and press Enter. If the folder isn't there, start Qliphah once, close it and check again.

Can Qliphah in Providence's Shadow run on a low end PC?

Qliphah's minimum graphics card is an Nvidia GeForce GTX 750 Ti or AMD Radeon R7 360, with 4 GB of RAM. A PC at or above those specs can use this config and the settings in this guide. A PC below them will likely struggle, because the config can't replace missing hardware.

How do I fix Qliphah stuttering and FPS drops?

Let the first launch finish, since the game compiles shaders then and you'll see hitches for a few minutes. Install it on an SSD if you can. Close background apps, update your GPU driver and use the best performance power mode on a laptop.

Which upscaler should I use for Qliphah on a low end PC?

Use TSR. It's the upscaler Qliphah offers, and it works on any graphics card, including older ones. Set the graphics options to their lowest values first, then choose TSR and keep the other heavy settings low.

Is it safe to undo the Qliphah Engine.ini changes?

Yes. Delete Engine.ini from the folder, or rename your Engine.ini.bak backup back to Engine.ini. The file says that deleting it returns the game to its defaults.