Remothered: Red Nun's Legacy
Low-end PC guide: FPS boost, lag and stutter fix

Remothered: Red Nun's Legacy config file
Free. The download link appears after a short wait.
- Put it in
%LOCALAPPDATA%\Remothered3\ Saved\ Config\ Windows - Engine
- Unreal Engine 5
Remothered: Red Nun’s Legacy runs on Unreal Engine 5.7.3, and its minimum Nvidia card is an RTX 2070 Super. This guide gives you a free config file that turns down the heavy graphics work, the in-game settings to change first, and fixes for stutter on a weak PC.
Can you run Red Nun’s Legacy on a low end PC?
- OS: Windows 11
- CPU: Intel Core i5-11600K or AMD Ryzen 5 3600X
- GPU: Nvidia GeForce RTX 2070 Super or AMD Radeon RX 5700 XT
- RAM: 16 GB
- Storage: 50 GB
If your PC is at or above these specs, the config and the settings below should help. If it is below them, expect low frame rates and stutter even with this config. The config reduces graphics work, but it can’t replace missing hardware.
Best Red Nun’s Legacy settings for low end PCs
Start by setting the graphics options to their lowest values, then change these:
- Upscaler: Pick TSR if you’re not sure. It works on any GPU. DLSS 4.5 needs an Nvidia RTX card, and FSR 4 needs a recent AMD card, so only pick those if your card supports them.
- Ray tracing: Turn it off, including the optional Hardware Lumen setting. Ray tracing adds a lot of GPU work for the lighting and reflections it draws.
- Frame rate cap: Set it to 60. If your PC can’t hold 60 frames per second, set it to 30. A steady 30 is smoother than a 60 that drops in and out. Some cutscenes are locked to 30 FPS anyway.
- V-Sync: Turn it off. It can hold your frame rate to your monitor’s refresh rate and add input lag.
Red Nun’s Legacy Engine.ini location and install
- Download the zip with the button above. Unzip it and find the
Engine.inifile. - Close the game completely, including any launcher that is still running.
- Press Windows + R, paste
%LOCALAPPDATA%\Remothered3\Saved\Config\Windowsand press Enter. If the folder doesn’t exist, start the game once, close it, and try again. - If the folder already has an
Engine.ini, rename it toEngine.ini.bak. This is your backup. - Copy the new
Engine.iniinto the folder. - Start the game.
What the config changes
The file changes only the settings listed here. It doesn’t touch network settings.
Post-processing
- Motion blur is off.
- Depth of field is off.
- Color fringing at the edges of the screen is off.
- Lens flares and light shafts are off.
- Film grain is off.
- Sharpening is set to 0.6.
Lighting and reflections
- Ambient occlusion, screen space reflections, subsurface scattering, contact shadows and capsule shadows are off.
- Volumetric fog uses a coarser grid.
Shadows
- Shadow quality is set to 2, and shadow resolution is capped at 1024.
- Shadows reach a shorter distance.
- Small objects cast shadows less often.
Draw distance and foliage
- View distance is set to 80 percent of the default.
- Detail mode is set to 1.
- Anisotropic filtering is set to 4.
- Grass and foliage density is set to 60 percent.
Unreal Engine 5: Lumen, Nanite and virtual shadow maps
- Lumen reflections are off, and Lumen stops tracing mesh distance fields.
- Nanite detail is reduced.
- Virtual shadow maps use a lower resolution for directional and local lights.
The streaming settings turn on async loading and turn off forced garbage collection, for smoother loading and fewer hitches when you move between areas.
How to fix Red Nun’s Legacy stuttering and FPS drops
Remothered: Red Nun’s Legacy is an Unreal Engine 5 game. The first launch compiles shaders, so let that finish and expect hitches for the first few minutes.
Install the game on an SSD if you can. It needs 50 GB of storage.
Then work through the basics on Windows:
- Close background apps, such as browsers and overlays from launchers.
- Update your GPU driver from the official site: Nvidia, AMD or Intel.
- On a laptop, plug in the power cable and set the power mode to best performance.
Undo the changes
Delete Engine.ini from the folder. If you made a backup, rename Engine.ini.bak back to Engine.ini instead. The game rebuilds its defaults.
Remothered: Red Nun's Legacy FAQ
Where is the Remothered: Red Nun's Legacy Engine.ini file?
Remothered: Red Nun's Legacy keeps it in %LOCALAPPDATA%\Remothered3\Saved\Config\Windows. Press Windows + R, paste that path and press Enter. If the folder isn't there, start the game once, close it and check again.
Can Remothered: Red Nun's Legacy run on a low end PC?
Remothered: Red Nun's Legacy needs an Nvidia GeForce RTX 2070 Super or AMD Radeon RX 5700 XT at minimum, with 16 GB of RAM and Windows 11. A PC that meets those specs can use this config. A weaker PC will likely struggle, because the config can't replace missing hardware.
Which upscaler should I use for Remothered: Red Nun's Legacy on an older GPU?
TSR works on any GPU, so pick it on an older card. DLSS 4.5 needs an Nvidia RTX card, and FSR 4 needs a recent AMD card. Only pick those if your card supports them.
How do I fix Remothered: Red Nun's Legacy stuttering and FPS drops?
Let the first launch finish, since the game compiles shaders then and you'll see hitches for a few minutes. Install it on an SSD if you can. Close background apps, update your GPU driver and use the best performance power mode on a laptop.
Is it safe to undo the Remothered: Red Nun's Legacy Engine.ini changes?
Yes. Delete Engine.ini from the folder, or rename your Engine.ini.bak backup back to Engine.ini. The config file says that deleting it returns the game to its defaults.