TBOOST

The Blood of Dawnwalker

Low-end PC guide: FPS boost, lag and stutter fix

The Blood of Dawnwalker FPS boost guide

The Blood of Dawnwalker config file

Free. The download link appears after a short wait.

Put it in
%LOCALAPPDATA%\Dawnwalker\Saved\Config\Windows
Engine
Unreal Engine 5
Replace the existing file, then start the game.

The Blood of Dawnwalker runs on Unreal Engine 5 with software Lumen lighting, and its minimum spec is a GTX 1060 or an RX 580. This guide gives you a free Engine.ini file, the settings to change first and fixes for stutter on a weak PC.

Can you run Blood of Dawnwalker on a low end PC?

  • OS: Windows 10
  • CPU: Intel Core i5-11400F or AMD Ryzen 7 2700X
  • GPU: Nvidia GeForce GTX 1060 or AMD Radeon RX 580
  • RAM: 16 GB
  • VRAM: 6 GB
  • Storage: 60 GB on an SSD

If your PC is below these specs, the game may run poorly even with the Engine.ini file. The file lowers the graphics work your GPU has to do, but it can’t replace missing hardware.

Best Blood of Dawnwalker settings for low end PCs

  • Set the graphics options to their lowest values, then change the items below.
  • Upscaling: Pick XeSS 2.0, since it works on any GPU. DLSS 4 needs an Nvidia RTX card, and FSR 4.1 needs a recent AMD card.
  • Frame rate limit: Set it to 60. If your PC can’t hold 60 FPS, set it to 30.
  • V-Sync: Turn it off.
  • Window mode: Pick borderless windowed.

Blood of Dawnwalker Engine.ini location and install

  1. Download the zip with the button above. Unzip it and find the Engine.ini file.
  2. Close Blood of Dawnwalker completely, including any launcher that is still running.
  3. Press Windows + R, paste %LOCALAPPDATA%\Dawnwalker\Saved\Config\Windows and press Enter. If the folder doesn’t exist, start the game once, close it and try again.
  4. If the folder already has an Engine.ini, rename it to Engine.ini.bak. This is your backup.
  5. Copy the new Engine.ini into the folder.
  6. Start the game.

What the config changes

The file changes only the settings listed here.

Post-processing

  • Motion blur is off.
  • Depth of field is off.
  • Color fringing is off.
  • Lens flares are off.
  • Light shafts are off.
  • Film grain is off.
  • Sharpening is set to 0.6.

Lighting and reflections

  • Ambient occlusion, screen space reflections, subsurface scattering, contact shadows and capsule shadows are off.
  • Volumetric fog uses a coarser grid.

Shadows

  • Shadow quality is set to 2.
  • Shadow resolution is capped at 1024.
  • Shadows reach a shorter distance.
  • Small objects drop their shadows sooner.

Draw distance and foliage

  • View distance is set to 80 percent of the default.
  • Detail mode is set to 1.
  • Anisotropic filtering is set to 4.
  • Grass and foliage density is set to 60 percent.

Lumen, Nanite and virtual shadow maps

  • Lumen reflections are off, and so is Lumen mesh distance field tracing.
  • Nanite detail is set lower.
  • Virtual shadow maps use a lower resolution for directional and local lights.

The streaming settings turn on async loading and stop forced garbage collection after levels unload, so loading is smoother and you see fewer hitches when you move between areas.

How to fix Blood of Dawnwalker stuttering and FPS drops

Blood of Dawnwalker is an Unreal Engine 5 game, so the first launch compiles shaders. Let that finish, and expect hitches for the first few minutes.

The minimum storage is 60 GB on an SSD, so install the game there if you can.

Then work through the basics on Windows:

  • Close background apps, such as browsers and overlays from launchers.
  • Update your GPU driver from the official site: Nvidia, AMD or Intel.
  • On a laptop, plug in the power cable and set the power mode to best performance.

Undo the changes

Delete Engine.ini from the folder. If you made a backup, rename Engine.ini.bak back to Engine.ini instead. The game rebuilds its defaults.

The Blood of Dawnwalker FAQ

Where is the Blood of Dawnwalker Engine.ini file?

Blood of Dawnwalker keeps it in %LOCALAPPDATA%\Dawnwalker\Saved\Config\Windows. Press Windows + R, paste the path and press Enter. If the folder isn't there yet, start the game once, close it and check again.

Can Blood of Dawnwalker run on a low end PC?

Blood of Dawnwalker needs at least an Nvidia GeForce GTX 1060 or AMD Radeon RX 580, with 16 GB of RAM and 6 GB of VRAM. Below that, the game may run poorly even with the Engine.ini file, because the file lowers the load on your GPU but can't replace missing hardware.

Which upscaler should I use on an older GPU in Blood of Dawnwalker?

Pick XeSS 2.0, since it works on any GPU. Blood of Dawnwalker also offers DLSS 4 and FSR 4.1, but DLSS needs an Nvidia RTX card and FSR 4.1 needs a recent AMD card, so older GPUs should skip them.

How do I fix Blood of Dawnwalker stuttering and FPS drops?

Let the first launch finish, because Unreal Engine 5 compiles shaders and causes hitches for the first few minutes. Install the game on an SSD. Close background apps, update your GPU driver and use the best performance power mode on a laptop.

Is it safe to undo the Blood of Dawnwalker Engine.ini changes?

Yes. Delete the Engine.ini file from the config folder, or rename your Engine.ini.bak backup to Engine.ini if you made one. The game rebuilds its defaults, so you can try the config and go back at any time.